Window Regulator Switches, Through 05.2008

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Window Regulator Switches, Through 05.2008

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Remove door trim panel.

- Disconnect the connector on the window regulator switch.

- Bend the frame outward on the long side of the switch and remove the switch.





Installing

Install in reverse order of removal.