Clutch Assembly Overview, LuK

Clutch Assembly Overview, LuK





1 Dual-mass flywheel

• Make sure centering pins are in place and seated correctly

• Contact surface for clutch lining must be free of grooves, oil and grease

2 Clutch plate

• Removing and installing => [ Clutch, LuK ] Clutch, LuK.

• Only replace together with SAC pressure plate

• Installed position:=> [ Installation Position of Clutch Plate ] Clutch, LuK

3 SAC pressure plate

• SAC = "self-adjusting clutch"

• Removing and installing => [ Clutch, LuK ] Clutch, LuK.

• Checking ends of diaphragm spring => [ Checking Ends of Diaphragm Spring ] Clutch, LuK

• Check spring connection and rivet connections => [ Checking Ends of Diaphragm Spring ] Clutch, LuK

• Only replace together with clutch plate

4 Bolt M6, 13 Nm

• Loosen and tighten in a diagonal sequence and in stages