Anti-Theft Warning System Sensors
Anti-Theft Alarm System and Interior Monitoring
Sedan => Anti-Theft Warning System Sensors
• Removing and installing the Right Rear Reading Lamp (W12) with the Right Anti-Theft Alarm System Ultrasound Sensor (G171) is shown in the illustration.
• Removing and installing the Left Rear Reading Lamp ( W11) with the Left Anti-Theft Alarm System Ultra Sound Sensor (G170) is identical.
CAUTION!
• Turn off the ignition and all electrical components.
• Remove the key.
• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.
Removing
- Carefully pry out the Right Rear Reading Lamp ( W12) with the Right Anti-Theft Alarm Ultra Sound Sensor (G171) with a screwdriver.
- Disconnect electrical connector.
Installing
Install in reverse order.