Backrest Cover and Cushion, Convertible

Rear Cover and Cushion

Backrest Cover and Cushion, Convertible

Removal





- Remove backrest. Refer to => [ Backrest, Convertible ] Rear Seats.

- Cut the upholstery clips -=> [ (Item 4) Cushion Clamp ] Rear Cover and Cushion (Overviews)- on the rear side.

- Detach the piping -=> [ (Item 2) Molding ] Rear Cover and Cushion (Overviews)- of the cover -=> [ (Item 3) Cover ] Rear Cover and Cushion (Overviews)- from the wire frame - 5 -.

- Detach the upholstery wire -=> [ (Item 6) Cushion Wire ] Rear Cover and Cushion (Overviews)- from the retaining wire -=> [ (Item 7) Retaining Wire ] Rear Cover and Cushion (Overviews)- in the cushion -=> [ (Item 1) Cushion ] Rear Cover and Cushion (Overviews)- and remove the cover -=> [ (Item 3) Cover ] Rear Cover and Cushion (Overviews)-.

Installation

To install, perform the steps used in removal in reverse order.