Illuminated Vanity Mirror

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Illuminated Vanity Mirror

• Removing and installing the Driver Side Illuminated Vanity Mirror (W20) and the Front Passenger Illuminated Vanity Mirror (W14) are the same.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Insert the (VAS 3409) or a small screwdriver behind the lens and pry the lamp out.





- Remove the lamp.

- Disconnect electrical connector.

Bulb 12 V/5 W

Installing

Install in reverse order of removal, noting the following:

- Make sure the illuminated vanity mirror is working correctly.