Rear Spoiler Switch

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Rear Spoiler Switch

The Rear Spoiler Switch (E127) " manually" extends and retracts the rear spoiler.

The Rear Spoiler Switch (E127) - arrow - is located under the instrument panel near the steering column.





The rear spoiler will extend all the way out when the ignition is turned on and the switch is in position - 1 -.





The rear spoiler will extend in steps all the way out when the ignition is turned on and the switch is in position - 2 -.

CAUTION!
Danger of injury!

Make sure there is enough clearance when "manually" extending or retracting the spoiler using the switch.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Loosen the switch housing - arrow - from the frame with a screwdriver and then remove it.





- Disconnect electrical connector.

Installing

Install in reverse order of removal.