Side Turn Signals

Side Turn Signals

• The side turn signals can only be removed from inside the vehicle.

• The side turn signals have long-life LEDs rather than customary bulbs.

• It is not necessary to replace the bulb. If damaged, the entire turn signal must be replaced.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the ignition key.

Removing

- Remove the inner cover for the plenum chamber.

- Remove the pollen filter.

- Remove the rubber grommet - 3 -.





- Release and disconnect electrical connection - 2 -.

- Remove the screws - 1 -. The screws are secured from falling.





- Remove the side turn signal.

Installing

Install in reverse order of removal, noting the following:

- Tighten the screw to 2 Nm.

- Make sure the turn signal is working correctly.