Diagram 634/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Parking brake warning light switch, brake fluid level warning switch, left front brake pad wear sensor, control module with indicator unit in instrument panel insert, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F9 - Parking Brake Warning Light Switch Locations

F34 - Brake Fluid Level Warning Switch

G34 - Left Front Brake Pad Wear Sensor ABS - Electrical and Electronic Component Locations - EDL/ASR/ESP

J89 - Daytime Running Lights Change-over Relay

J285 - Control module with indicator unit in instrument panel insert

J533 - Data Bus On Board Diagnostic Interface

K32 - Brake Pad Wear Indicator Light

K47 - ABS Warning Light

K118 - Warning light for brake system

K155 - Warning light for Anti-Slip Control (ASC)

S15 - Fuse 15 in fuse holder

T9c - 9-Pin Connector

T32 - 32-Pin Connector, blue, on instrument cluster

T32a - 32 Pin Connector, green, on instrument cluster

(119) - Ground connection -1-, in headlight wiring harness

(120) - Ground connection -2-, in headlight wiring harness

(135) - Ground connection -2-, in instrument panel wiring harness

(501) - Threaded connection -2- (30) on the relay plate

(642) - Ground Connection (on electronic fan control)

(A76) - Connector (K-diagnosis wire) in instrument panel wiring harness

(A167) - Plus Connection 3 (30a) (in instrument panel wiring harness)

(D55) - Left Brake Wear Indicator Connection (in engine compartment wiring harness)

(D56) - Left Brake Wear Indicator Connection (in engine compartment wiring harness)

Previous Diagram 634/4 (Tracks 29-42)