Diagram 644/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Heated Seat Adjuster, Driver's Heated Seat Temperature Sensor, Driver's Heated Seat Control Module, Driver's Seat Heating Element, Driver's Backrest Heating Element





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D - Ignition/Starter Switch

E1 - Light Switch

E20 - Instrument Panel Illumination Dimmer Switch

E94 - Driver's Heated Seat Adjuster

G59 - Driver's Heated Seat Temperature Sensor Locations

J131 - Driver's Heated Seat Control Module Locations

L44 - Heated Seat Switch Illumination

S1 - Fuses (on fuse/relay panel)

S244 - Fuse in Fuse Panel

T2f - Double Connector

T2i - Double Connector, below driver's seat

T3k - 3-Pin Connector

T6 - 6-Pin Connector

T6a - 6-Pin Connector, green, below driver's seat

T8 - 8-Pin Connector

T17 - 17-Pin Connector

Z6 - Driver's Seat Heating Element Locations

Z7 - Driver's Backrest Heating Element Locations

Z21 - Right Washer Nozzle Heater

(96) - Ground Connection 1 (in heated seats wiring harness)

(501) - Threaded Connection 2, terminal 30 (on relay panel)

(503) - Threaded Connection 2, terminal 75x (on relay panel)

(A4) - Plus Connection (58b) (in instrument panel wiring harness)

(A32) - Plus Connection (30) (in instrument panel wiring harness)

(A34) - Connection (75x) (in instrument panel wiring harness)

(A52) - Plus Connection 2 (30) (in instrument panel wiring harness)

Next Diagram 644/3 (Tracks 15-28)