Headlamp Range Control Positioning Motor

HID Headlamp

Headlamp Range Control Positioning Motor

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the ignition key.

Removing

- Remove headlamp.

- Remove the cover. Refer to => [ HID Bulb ]. HID Bulb

- Remove the screws - arrows - on the positioning motor.





- Remove the ball head on the axle from the reflector.

- Disconnect the connector on the headlamp range control positioning motor.

Installing

Install in reverse order of removal, noting the following:

- Make sure the headlamp is working correctly.

- Perform basic setting of headlamp, refer to => [ HID Headlamp, Basic Setting ] HID Headlamp, Basic Setting.