Muffler With Mountings Assembly Overview

Muffler With Mountings Assembly Overview

Center and rear muffler, separating.







1 - From front muffler
2 - Clamping sleeve
- Installed location
- Tighten bolts evenly
- M8: 25 Nm
- M10: 40 Nm
3 - Retaining loop
- Replace if damaged
4 - Suspended mount
- For center muffler
5 - 25 Nm
6 - Center muffler
- Original equipment as one unit with rear muffler. For repairs, replace each separately.
- Separating exhaust system.
7 - Rear muffler
- Original equipment as one unit with center muffler. For repairs, replace each separately.
- Separating exhaust system.
8 - Suspended mount
- For rear muffler
9 - Clamping sleeve
- For repairs
- For individual replacement of center and rear mufflers
- Installed location
- Tighten bolts evenly
- M8: 25 Nm
- M10: 40 Nm







Clamping Sleeve Location
- Install clamping sleeve so that bolt end - arrow - does not project beyond lower edge of clamping sleeve.
- Threaded connection points toward the right.







Installation Position of Clamping Sleeve (for the event of repairs)
- Install clamping sleeve so that bolt end - arrow - does not project beyond lower edge of clamping sleeve.
- Threaded connection points toward the right.