Release Element

Rear Lid

Release Element

• If the rear lid does not open, use the emergency release inside the rear lid trim panel and open it manually. Refer to the Owner's Manual.

Removing





- Remove the rear lid trim panel.

- Be sure to perform the work procedures if the vehicle has a rearview camera.

- Disconnect harness connector - 2 - from unlocking element - 1 -.

- Remove the bolts - 3 -.

- Remove the unlocking element - 1 - from the rear lid.

Installation





Installation of unlocking element - 1 - is the same in reverse order.

Screw - 2 - tightening specification: 4 Nm.

• Perform a function test on the unlocking components before closing the rear lid.