Oil Pump: Service Precautions

Oil Pan and Oil Pump

• If large quantities of metal particles or abraded material are detected during engine repairs, it may be an indication for a damaged crankshaft or rod bearings. To prevent further damage, perform the following steps after the repair:

• Carefully clean oil passages

• Replace oil injection jets

• Replace oil cooler

• Oil Filter, Removing and Installing

• The oil level must not be above the max. mark - danger of damage to catalytic converter!

Oil Pan, Oil Pump, Assembly Overview => [ Oil Pan, Oil Pump, Assembly Overview ] Oil Pan, Oil Pump, Assembly Overview.

Oil Separator, Removing and Installing => [ Oil Separator, Removing and Installing ] Oil Separator, Removing and Installing.

Lower Oil Pan Section, Removing and Installing => [ Oil Pan Lower Section, Removing and Installing ] Oil Pan Lower Section, Removing and Installing

Oil Pump, Removing and Installing => [ Oil Pump, Removing and Installing ] Service and Repair.

Oil Pan, Upper Part, Removing and Installing => [ Oil Pan, Upper Section, Removing and Installing ] Oil Pan, Upper Section, Removing and Installing