Diagram 140/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S) Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J623 - Engine Control Module (ECM) Control Modules in Engine Compartment

T4no - 4-Pin Connector

T6w - 4-Pin Connector

T94 - 94-Pin Connector

Z19 - Oxygen Sensor (O2S) Heater Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

Z28 - Oxygen Sensor (O2S) Heater 2 Locations Diagrams

(D189) - Connection (87a) (in engine pre-wiring wiring harness)

Previous Diagram 140/12 (Tracks 141-154)

Next Diagram 140/14 (Tracks 169-182)