Warning Triangle Bracket

Rear Lid Trim

Warning Triangle Bracket

Removal

- Open the warning triangle bracket.

• The opening angle of the warning triangle bracket must be approx. 45° for the following removal procedure.

- Press warning triangle bracket - 1 - with the (3409) inward on the right side and release it from the mounting pin.





- Remove warning triangle bracket - 1 - from the left mounting pin.





Installation

- Slide warning triangle bracket - 1 - at a 45° angle onto the left mounting pin.





- Then press the warning triangle bracket to the left and slide it onto the right mounting pin.

- After assembly, perform the function test.