Automatically Shifted Manual Transmission/Transaxle: Service and Repair

Needle Bearings, Removing from Crankshaft and Installing

Only for vehicles equipped with DSG(R)





Special tools, testers and auxiliary items required

• Puller (T10055) with adapter (T10055/3)

• Centering Mandrel (3176) or Drift (VW 207 C)

• Extractor e.g. Kukko (21/2)

Removing

- Pull out using standard extractor e.g. Kukko (21/2) - arrow -, adapter (T10055/3) and puller (T10055).





Installing

• Side of needle bearing with writing on it must be readable when installed.

- Drive in using drift (VW 207 C) or centering mandrel (3176).





Installation depth dimension - a - = 2mm