Controls, Housing
Special Tools
Special tools, testers and auxiliary items required
• Engine Support Bridge (10-222 A)
• Bracket with Spindle and Hook (10-222 A/10)
• Adapter (10-222 A/13)
• Engine/Transmission Jack (V.A.G 1383 A)
• Engine Support Feed (10-222 A/8)
• Engine Support Adapter (10-222 A/3)
• Adapter (10-222 A/18)
• Pin (3282/29)
• Bracket (T10346)
• Engine Support Device (3300 A)
• Adapter (VW 771/40)
• Bracket for Engine (10 - 222 A/1)
• Driving Sleeve (VW 244B)
• Thrust Plate (VW 401)
• Punch (VW 407)
• Tube 37 mm Dia. (VW 416 B)
• Guide Pin (VW 436 A)
• Guide Pin (VW 439)
• Holding Fixture (VW 801)
• Guide Pin (10-15)
• Thrust Pad (3124)
• Bearing Driver (3264)
• Subframe Support Assem. Device (3290)
• Drift (T10168)
• Thrust Piece (T10203)
• Punch (VW 407)
• Thrust Piece (T40008)
• Triple Square Socket Driver (3357)
• Connecting Pin (T10027 A)
• Hose Clamp Pliers (V.A.G 1275)
• Special Hook (3370)
• Sleeve (VW 423)
• Pulling Hook (T20143)
• Thrust Block (T10083)
• Drift (T10362)
• Socket and Extended Bit (T10107)
• - 1 - Kukko Extractor 14.5-18.5 mm (Kukko 21/2)
• - 1 - Kukko Extractor (Kukko 21/4)
• - 4 - Kukko Support (Kukko 22/2)
• Thread Adapter from Kukko Support (Kukko 22/1)
Special tools, testers and auxiliary items required
• Hose Clamps up to 25 mm Dia. (3094)
• Transmission Support (3282)
• Adjustment Plate (3282/33)
• Support Elements (determine when mounting the adjustment plate to the transmission support)
• Transmission Support Jig (3336)
• Torque Wrench (5-50 Nm) (V.A.G 1331)
Special tools, testers and auxiliary items required
• Holding Plate (VW 309)
• Holding Fixture (VW 313)
• Transmission Support (VW 353)
• Thrust Tube (VW 455) or Sleeve (3160)
• Slide Hammer-Complete Set (VW 771)
• Sleeve (30-21)
Special tools, testers and auxiliary items required
• Bracket (30-211A)
• Thrust Piece (T10042)
• Thrust Piece (T40008)
• Torque Wrench (5-50 Nm) (V.A.G 1331)
• Heat Gun (V.A.G 1416)
• Drift (T10169)
Special tools, testers and auxiliary items required
• Thrust Plate (VW 402)
• Punch (VW 411)
• Tube Trans. Driveshaft (VW 426)
• Thrust Pad 16.5/28 mm Dia. (VW 431)
• - 1 - Kukko Extractor 18.5-23.5 mm (Kukko 21/3)
• - 4 - Kukko Support (Kukko 22/1)