Diagram 71/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Door Control Module, Driver's Mirror Adjustment/Fold-in Motor, Heated Outside Mirror Relay, Driver's Entry Lamp and Turn Signal (in outside mirror)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J99 - Heated Outside Mirror Relay Overview Of Relay Carrier

J386 - Driver's Door Control Module Locations

J519 - Vehicle Electrical System Control Module

L131 - Driver's Exterior Mirror Turn Signal Lamp

T2ab - Double Connector

T2ac - Double Connector

T2ad - Double Connector, on mirror

T3g - 3-Pin Connector

T16a - 16-Pin Connector

T20a - 20-Pin Connector

T28 - 28-Pin Connector, connector station A-pillar, left

V17 - Driver's Mirror Adjustment Motor

V121 - Driver's Mirror Fold-in Motor

V149 - Driver's Mirror Adjustment Motor

W52 - Driver's Entry Lamp (in outside mirror)

Y20 - Driver's Automatic Day/Night Outside Mirror

Z4 - Driver's Heated Outside Mirror

(205) - Ground Connection (in Driver's door wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

* - Only models with fold-in mirrors

_ . _ . _ - Only models with automatic day/night interior/outside mirror

** - Through November 2005

*** - From December 2005

Previous Diagram 71/7 (Tracks 71-84)

Next Diagram 71/9 (Tracks 99-112)