Front Bucket Seat Cover and Cushion

Front Seat Covers and Upholstery

Front Bucket Seat Cover and Cushion

• Removal and installation of the components are described for the left seat. The same procedure applies for the removal and installation of the components of the right seat.

Removal

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seats

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove front left bucket seat trim. Refer to => [ Left Bucket Seat Trim ] Front Seats

- Remove the front seat belt latch:

• 2–door: => [ Belt Latch, 2-door ] Seat Belts

• 4–door: => [ Belt Latch, 4-door ] Seat Belts

- Remove front right bucket seat trim. Refer to => [ Right Bucket Seat Trim ] Front Seats

- Remove front bucket seat backrest. Refer to => [ Front Bucket Seat Backrest ] Front Seats

- Loosen profile - 1 - from mount - 2 - in rear area of seat base.





• From VIN 2615638 (calendar week 25/2006), seat cover is secured to seat with 11 additional clips (N.107.297.01) - arrows -.

• 4 clips each on the right and left and 3 clips on the front side.

• Remove clips carefully from surrounding channel with a suitable tool.





- Loosen Velcro strip on both sides - 1 -.





- Loosen surrounding profile - 2 - on seat pan - 3 -.

- Loosen all Velcro strips - 1 - on cover from depression in upholstery - 2 -.





- Remove upholstery from bucket seat.

Installation

- To install, perform the steps used for removal in reverse order.