Tail Lamp Adjuster

Tail lamps

Tail Lamp Adjuster

• On vehicles from 11.05, an adjustment element is installed which can be used to adjust the flush dimension to the bumper cover.

Removing

- Remove taillamp assembly in side panel. Refer to=> [ Side Pane Tail Lamps ]. Side Pane Tail Lamps

- Press retaining tabs - arrow A - on adjusting element - 1 - together and press element - 1 - in - direction of arrow B - out of body panel.





Installing

- Press adjusting element - 2 - in - direction of arrow - into body panel - 1 - using an SW10 socket until element engages.