Headlamp Washer Pump: Service and Repair

Headlamp Washer Pump

Headlamp Washer Pump is installed at tank for windshield washing system and headlamp cleaning system in right wheel housing.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove front bumper cover Removal and Installation.

- Remove Headlamp Washer Pump (V11) - 9 - upward out of tank.





- Disconnect electrical connection - 10 -.

- To disassemble connecting tube - 8 -, pull securing clip at connection and pull connecting tube - 8 - from Headlamp Washer Pump (V11).

Installing

Install in reverse order of removal, noting the following:

- Tighten all threaded connections to specified torques. Refer to=> [ Specifications ] Specifications.

- Bleed headlamp washer system after completing assembly work. Refer to=> [ Headlamp Washer System, Bleeding ] Procedures.