Power Seat Height Adjustment Unit

Front Seats

Power Seat Height Adjustment Unit

Removal and installation of seat height adjuster is described for left backrest frame. Removal and installation of the right seat height adjuster is performed in the same way.

Removal

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove front right seat trim. Refer to => [ Right Seat Trim ] Right Seat Trim

- Remove left power seat trim. Refer to => [ Left Power Seat Trim ] Left Power Seat Trim

- Remove retainer and power seat bracket. Refer to => [ Bracket and Support, Power Seat ] Bracket and Support, Power Seat

- Remove front seat drawer mount. Refer to => [ Seat Drawer Mount ] Seat Drawer Mount

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Remove cover and upholstery from front seat backrests. Refer to => [ Front Seat Pan Covers and Upholstery ] Front Seat Covers and Upholstery

- Remove screw - 1 - in rear area of seat base.

• Screw - 1 - in installation position points from inside toward outside.

- Disconnect wiring harness - 2 - from height adjuster - 3 -.

- Remove the two bolts - 4 -.

- Remove height adjuster - 3 - from mounts in seat base.





Installation

- To install, perform the steps used for removal in reverse order.