Diagram 637/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC), Electro-mechanical Power Steering Indicator Lamp, Steering Column Electronic Systems Control Module, Steering Angle Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G85 - Steering Angle Sensor, on steering column electronic systems control module Locations

J285 - Instrument Cluster Control Module

J519 - Vehicle Electrical System Control Module

J527 - Steering Column Electronic Systems Control Module Locations

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console

K161 - Electro-mechanical Power Steering Indicator Lamp

T16 - 16-Pin Connector, under instrument panel, left, Data Link Connector (DLC)

T20 - 20-Pin Connector

T20d - 20-Pin Connector

T36 - 36-Pin Connector

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections In Interior

(367) - Ground Connection 2 (in main wiring harness)

(605) - Ground Connection (on upper steering column) Overview of Ground Connections In Interior

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 637/3 (Tracks 15-28)