Fan Shroud and Fans

Fan Shroud and Fans

Removing

- Remove the noise insulation.

- Unclip the lower coolant hose from the fan shroud.

- Disconnect electrical harness connector - 1 - and remove the bolts for the fan shroud - arrows -.





- Remove the fan shroud downward.

- Disconnect electrical harness connector - 1 - and lay wire free. Install position of harness connector deviates from the illustration.





- Remove the nuts - arrows - and remove the coolant fans.

Installing

Installation is performed in the reverse order of removal. When doing this note the following:

Tightening Specification