Diagram 629/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Camshaft Position (CMP) Sensor, Intake Air Temperature (IAT) Sensor, Manifold Absolute Pressure (MAP) Sensor, Secondary Air Injection (AIR) Sensor 1, Engine Coolant Temperature (ECT) Sensor (on Radiator)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

G42 - Intake Air Temperature (IAT) Sensor Locations

G71 - Manifold Absolute Pressure (MAP) Sensor Locations

G83 - Engine Coolant Temperature (ECT) Sensor (on Radiator) Locations

G609 - Secondary Air Injection (AIR) Sensor 1 Locations

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T3d - 3-Pin Connector

T4bu - 4-Pin Connector

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(327) - Sensor Ground Connection (in engine compartment wiring harness)

(D101) - Connection 1 (in engine compartment wiring harness)

(D108) - Connection 6 (in engine compartment wiring harness)

(D109) - Connection 7 (in engine compartment wiring harness)

Previous Diagram 629/9 (Tracks 99-112)

Next Diagram 629/11 (Tracks 127-140)