Radio, Stereo, and Compact Disc: Service and Repair

Radio


Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.

Removing

- Disconnect and isolate the negative battery negative cable.

- Remove the instrument panel center bezel.






- Remove the radio mounting fasteners.

- Disconnect the electrical connectors.

- Disconnect the antenna cables (3) by pulling the locking antenna connector (2) away from the radio (1).

- Remove the radio.

Installing






- Connect the wire connectors and antenna cables to the radio.

- Install the radio into the instrument panel.

- Install the mounting fasteners.

- Install the instrument panel center bezel.

- Connect the negative battery cable.