Stabilizer

Stabilizer

Removing

- Open the sliding door (1).






- Remove the screws attaching the stabilizer (2) to door end frame.

- Remove the stabilizer (2) from the vehicle.

Installing

- Place the stabilizer (2) in position on vehicle.






• Loosely install the screws first. Fit should be snug but free to move when closing door to align to body half stabilizer.

- Loosely install the screws attaching the stabilizer (2) to the door (1) end frame.

- Close the door (1) and reopen in order to align the stabilizers (2) to the body.

- Finally tighten the screws taking care to maintain alignment.

- Verify the sliding door operation.