Seat

Seat

Removing

- Move the front seat to the full forward position, if required.

- Using the upper handle, release the seat back latch allowing the seat back to fold forward.

- Using the lower handle, release the seat base, allowing the seat to fold forward.

- Grasp the release bar under the rear of seat and pull, disengaging the seat anchor latches.

- Lift and remove the seat from the vehicle.

Installing

- Position the seat into the vehicle and set the seat on the anchor latches, allowing the seat to latch.

- Fold the seat base down.

- Fold the seat back up.

- Reposition the front seat as required.