Body - Sliding Door Grinding Noise When Operated

58 09 01

July 30, 2009

2020944





Vehicle Information

Condition

Sliding Door Lower Hinge Grinding

Technical Background

Customers may experience a grinding sound when opening and closing the sliding door.

Production Solution

Final production countermeasure pending.

Service

- Open and close the sliding door multiple times.

- Ensure there are no obstructions or debris in the track and listen for a grinding sound originating from the lower track of the door.

- If the above symptom/condition is experienced or can be verified, perform the Repair Procedure below.

Procedure

- Remove interior sliding door handle.

TIP:
Partially remove the door panel enough to gain access to all the lower hinge assembly bolts. DO NOT remove the panel completely.





- Install lower hinge assembly Part No. 7B0 843 397A (Left) or 7B0 843 398A (Right). See Lower Hinge, in ElsaWeb.

- Install interior trim panel by pressing it back into place.

- Install interior sliding door handle. See Rear Door, Inside Door Handle, Installation in ElsaWeb.





Warranty





Required Parts and Tools

No Special Tools required.

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.