RKE FOB 3 Performance - FOBIK Transmitter

B1A16 - RKE FOB 7 Battery Low

For a complete wiring diagram, refer to.

• When Monitored: During key interrogation and when a valid RKE transmission is read.

• Set Condition: If the battery in the Fob-Integrated-Key (FOBIK) is low during key interrogation, with a valid key, this code will set. It may also set during a valid RKE button press.






Test Step 1 - TEST FOR INTERMITTENT CONDITION

• Verify that the FOBIK in use is the FOBIK causing the DTC to set.

• Turn the ignition on.

• Using the scan tool, record and erase the DTCs.

• Turn the ignition off and remove the FOBIK.

• Operate the FOBIK in all positions several times.

• Turn the ignition on.

• Using the scan tool, read the active DTCs.

Does the scan tool display: B1A16-RKE FOB 7 BATTERY LOW as active?

Yes

• Replace the FOBIK battery. Test the FOBIK using the RF Detector RF Detector. If the Strength Display does not display "Strong", replace and program the FOBIK using the scan tool.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior

No

• Testy complete. The conditions that caused this code to set are not present at this time.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior