B1E61

B1E61 - 3rd Row Seat Folded Position Stop Not Learned

For a complete wiring diagram, refer to.

• When Monitored: Continuously.

• Set Condition: If the folding seat module has not yet learned it's hard stop positions, a DTC is logged.






Test Step 1 - Check For Related Diagnostic Trouble Codes

• Turn the ignition ON.

• With the scan tool, read DTCs.

Does the scan tool display any seat position sensor or circuit performance DTCs?

Yes

• Diagnose and repair the other DTCs first. Refer to => Non - DTC Based Diagnostics.

No

• Go to Test Step 2 => [ Test
Step 2 - Attempt to Initialize the 3rd Row Folding Seat Module ]

Test Step 2 - Attempt to Initialize the 3rd Row Folding Seat Module

• Turn the ignition ON.

• With the power folding seat switch, move the 3rd row seat to it's different folded positions.

• With the scan tool, erase all DTCs.

• With the scan tool, read DTCs.

Does the scan tool display B1E61 - 3rd Row Seat Folded Position Stop Not Learned as active?

Yes

• Replace the folding seat module.

• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test

No

• Test complete.

• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test