B1EB6
B1EB6 - Left Seat Recliner Calibration Incomplete
For a complete wiring diagram, refer to.
• When Monitored: Continuously.
• Set Condition: The folding seat module will display this code if the recliner calibration needs to be performed.
Test Step 1 - DTC Active
• Turn the ignition ON.
• With the scan tool, read DTCs.
Does the scan tool display B1EB6 - Left Seat Recliner Calibration Incomplete as Active?
Yes
• Using the scan tool, perform the folding seat module "Recliner End of Travel Calibration" routine. Upon completion erase the folding seat module DTCs.
• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test
• Ensure all four power 3rd row seat leg latches are latched prior to performing the recliner calibration routine.
No
• Erase the stored DTC.
• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test