Wireless Ignition Node

B210B - System Voltage High

For a complete wiring diagram, refer to.

• When Monitored: At all times.

• Set Condition: This is a CAN message that the system voltage was above 16.0 volts for over 15 seconds.






Test Step 1 - CHECK ENGINE DTCs

• With the scan tool, read Powertrain DTCs.

Are there any Powertrain Charging or Battery DTCs present?

Yes

• Perform the appropriate diagnostic procedure.

No

• This code is a CAN system message for information only. Check the charging system in accordance with the Service Information.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior