Right Front Door Module

B210E - Battery Voltage High

For a complete wiring diagram, refer to.

• When Monitored: At all times.

• Set Condition: The module senses voltage input above 15.9 volts for over 15 seconds.






Test Step 1 - Check Engine DTCs

• With the scan tool, read the engine DTCs.

Are there any engine charging or battery DTCs present?

No

• Go to Test Step 2

Yes

• Perform the appropriate diagnostic procedure.

Test Step 2 - Test for an Intermittent Condition

• With the scan tool, erase all DTCs.

• Start the engine and run for 2 minutes.

• With the scan tool, read the DTCs.

Does the scan tool display B210E - Battery Voltage High?

Yes

• Replace the door module.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior

No

• The condition that caused this symptom is currently not present. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also, inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals. Repair as necessary.

• Perform the Body Verification Test. Refer to => Non-DTC Based Diagnostics. Body Interior