B2260

B2260 - Folding Seat Module Internal

For a complete wiring diagram, refer to.

• When Monitored: ignition ON.

• Set Condition: This code is set immediately if the folding seat module internal self test fails.






Test Step 1 - Test For Intermittent Condition

• With the scan tool, erase all DTCs.

• Cycle the ignition switch off then back on.

• With the scan tool, read DTCs.

Does the scan tool display B2260 - Folding Seat Module Internal?

Yes

• Replace the folding seat module.

• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test

No

• The condition that caused this symptom is currently not present. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also, inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals. Repair as necessary.

• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test











Edition 112410 New