B235A

B235A - ECU in Plant Mode Active

For a complete wiring diagram, refer to.

• When Monitored: Ignition ON.

• Set Condition: This code is normally displayed when the power folding seat is in it's stored mode prior to being installed into a vehicle.






Test Step 1 - Test for Intermittent Condition

• With the scan tool, erase all DTCs.

• Press the Normal button on the power folding seat switch.

• With the scan tool, read DTCs.

Does the scan tool display B235A - ECU in Plant Mode Active?

Yes

• Replace the folding seat module.

• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test

No

• Test complete.

• Perform Power Folding Seat System Verification Test. Refer to => Non - DTC Based Diagnostics. Power Folding Seat System Verification Test