Lost Communication With the PCM
U0100 - Lost Communication With The PCM
For a complete wiring diagram, refer to.
• When Monitored: Ignition run time is greater than one second. Battery voltage between 9 and 16 volts. Engine run time greater than three seconds.
• Set Condition: Bus messages not received from the Powertrain Control Module (PCM) for approximately two to five seconds.
Test Step 1 - ACTIVE DTC
• Ignition on, engine not running.
• With the scan tool, select view DTCs.
Does the scan tool display as active: U0100-LOST COMMUNICATION WITH THE ECM/PCM?
Yes
• Refer to => Electrical Equipment DTC Based Diagnostics and perform the U0001-CAN C Bus diagnostic procedure. U0001
No
• perform the Stored Lost Communication DTCs diagnostic procedure. Stored Lost Communication DTCs Refer to => Non-DTC Based Diagnostics.