Passive Entry Antennas, Front Door

Front Door







Removal

- Disconnect the battery negative cable.

- Remove the trim panel from the inside of the front door..

- Disconnect the door wire harness connector (3) from the Low Frequency (LF) antenna (2) connector receptacle.

- Remove the two screws (4) that secure the LF antenna to the front door hardware carrier plate (1).

- Remove the LF antenna from the front door.

Installation







- Position the Low Frequency (LF) antenna (2) to the front door hardware carrier plate (1).

- Install and tighten the two screws (4) that secure the LF antenna to the carrier. Tighten the screws securely.

- Connect the door wire harness connector (3) to the LF antenna connector receptacle.

- Install the trim panel onto the inside of the front door..

- Connect the battery negative cable.