Erasing Homelink Transceiver Codes

Erasing Homelink Transceiver Codes

• Individual channels cannot be erased. Erasing the HomeLink(R) transceiver codes will erase ALL programmed codes.

To erase programming from all three buttons (individual buttons cannot be erased but can be reprogrammed):

• Press and hold the two outer HomeLink(R) transceiver buttons until the indicator light begins to flash after 20 seconds. Release both buttons. Do not hold for longer than 30 seconds. HomeLink(R) is now in learning mode and can be programmed at any time. Refer to => [ Programming Homelink Transceiver Codes ] Programming Homelink Transceiver Codes.