Liftgate Trim Panel, Upper

Liftgate Trim Panel, Upper

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

Removing






- Disconnect the power liftgate link rod from the liftgate pivot , if equipped.

- Using trim removal wedge (RMCP101) , disengage the clips securing the liftgate upper trim panel (3) to the liftgate (1).

Installing






- Position the liftgate upper trim panel (3) to the liftgate (1) and engage the clips. Make sure the retaining clips are fully engaged.

- Connect the power liftgate link rod to the liftgate pivot, if equipped.

- Connect the negative battery cable.