Sliding Door Trim Panel

Sliding Door Trim Panel

Removing






- Disconnect the negative battery cable.

- Remove the interior door handle bezel. Refer to => [ Sliding Door Handle Bezel ] Sliding Door Handle Bezel.

- Remove the screw (3).

- Remove the power window switch, if equipped.

- Remove the heated seat switch, if equipped. Refer to => [ Heated Seat Switch, Second Row ] Heated Seat Switch, Second Row.

- Remove the upper rear molding assembly.

- Remove the door trim panel (1).

- Remove the sunshade from the door trim panel by removing the fasteners on the back of the trim panel and remove the sunshade, if required.

Installing






- Install the sunshade to the trim panel and install the applique fasteners, if required.

- Install the door trim panel (1) to the sliding door.

- Install the upper rear molding assembly.

- Install the heated seat switch, if equipped. Refer to => [ Heated Seat Switch, Second Row ] Heated Seat Switch, Second Row.

- Install the power window switch, if equipped.

- Install the screw (3).

- Install the interior handle bezel. Refer to => [ Sliding Door Handle Bezel ] Sliding Door Handle Bezel.

- Connect the negative battery cable.