Memory Seat Module

Memory Seat Module

Removing






- Position the driver front seat to the full up position.

- Disconnect the negative battery cable.

- Working from the front of the seat, disconnect the electrical connectors (5).

- Unsnap the tabs (1) securing the memory seat module (4) into the bracket (3).

- Pivot the MSM upward to remove it from the front of the seat frame (2).

Installing







The MSM mounting tabs can be damaged during module installation. Use care to properly align tabs to prevent binding that could result in tab breakage.

- Place the MSM (4) into position making sure the tabs (1) are properly aligned with the bracket (3).

- Push down on the MSM snapping the clips into place in the bracket.

- Connect the MSM harness connectors (5).

- Connect the negative battery cable.

- Using an appropriate scan tool go to the MSM miscellaneous functions and perform the standardization routine.

- Verify system and vehicle operation.