Seat Cover and Cushion

Seat Cover and Cushion

Removing

- Remove the seat side shields. Refer to => [ Seat Back Hinge Cover ] Seat Back Hinge Cover.

- Remove seat track rear cover, if equipped.

- If equipped, open storage bin to access front pan bolts.

- Remove bolts securing the seat cushion pan to seat riser.

- Disconnect wire connectors, if equipment.

- Remove seat cushion from seat.

- Disengage J strap retainers holding seat cover to cushion.

- Remove seat cushion pan from cover and pad.

Installing

- Place seat cushion cover in position on seat cushion.

- Engage J strap retainers to hold seat cover to cushion.

- Place seat cushion in position on seat.

- Connect wire connectors, if equipment.

- Install bolts securing the seat cushion to seat riser. Tighten bolts to 40 Nm (29.5 ft lbs).

- If equipped, close storage bin.

- Install seat track rear cover (if equipped).

- Install seat cushion side covers. Refer to => [ Seat Back Hinge Cover ] Seat Back Hinge Cover.