Power Folding Seat Switch, D-Pillar

Power Folding Seat Switch, D-Pillar

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

Removing






- Disconnect the negative battery cable.

- Using trim removal wedge (RMCP101) , disengage the third row power folding seat switch and bezel (4) from the D-Pillar upper trim panel (5).

- Disconnect the switch electrical connector (3) and remove the switch.

Installing






- Position the switch and connect the electrical connector (3).

- Push the switch into the D-Pillar upper trim panel (5) until the tabs are fully engaged.

- Connect the negative battery cable.

- Using an appropriate scan tool, check and erase any third row power folding seat control module diagnostic trouble codes related to the D-Pillar switch.