Air Temperature Sensor ( Ambient / Intake ): Service and Repair

Intake Air Temperature Sensor

Removing






- Disconnect the negative battery.

• Clean any dirt from sensor area prior to removing from the air cleaner housing.

- Disconnect the engine wiring harness electrical connector from the intake air temperature sensor (1).

- Remove the IAT sensor (1) from the air cleaner housing (2) by turning the sensor 1/4 turn in the counterclockwise direction.

Installing






- Install the IAT sensor (1) to the air cleaner housing (2) by turning the sensor 1/4 turn in the clockwise direction.

- Connect the engine wiring harness electrical connector to the IAT sensor (1).

- Connect the negative battery cable.