Shift Cable: Service and Repair

Shift Cable

Removing

- Remove the instrument panel knee bolster.

• Ensure that the lock tab on the shift cable (2) is depressed before pulling the cable from the shift lever housing.

- Remove the cable from the shift lever (1 and 2).






- Disconnect the shift cable (1) from the transaxle manual valve lever (2).






- Disconnect the shift cable from the bracket.

- Remove the grommet from the bulkhead.






- Pull the cable (2) through the bulkhead (1) into the passenger compartment.

Installing

• Ensure the rubber grommet in the bulkhead is fully seated to prevent water leaking into the passenger compartment.

- Install the shift cable (2) through the bulkhead (1) from the passenger compartment.






- Seat the rubber grommet in the bulkhead.

- Connect the shift cable to the bracket.

- Connect the shift cable (1) to the transaxle manual valve lever (2).






• Ensure that the lock tab on the shift cable (2) is seated after the cable in installed to the shift lever housing.

- Install the cable to the shift lever (1 and 2).






- Install the instrument panel knee bolster.