Rear View Camera System Control Module (J772)

Rear View Camera System Control Module (J772)

Control module is installed in luggage compartment behind right side wall trim.

Removing

- Turn off the ignition and all electric consumers and remove the key.

- Remove the right luggage compartment trim panel.

- Disconnect both connectors - 1 - and - 2 -.






- Press the release button - arrow - and pull the rear view camera control module - 3 - out of its holder.

Installing

Install in reverse order of removal.

Only if the control module has been replaced

- Calibrate the system again. Refer to => [ Rearview Camera System, Calibrating ] Rearview Camera System, Calibrating.