Diagram 38/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine hood contact switch, Vehicle electrical system control module, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E386 - Automatic dimming interior rearview mirror switch

F266 - Engine hood contact switch Locations

J519 - Vehicle electrical system control module Control Modules in Pass Compartment

SC13 - Fuse 13 (on fuse panel C) Overview Of Fuses

T2n - Double connector

T6a - 6-pin connector Component Locations

T52a - 52-pin connector

T52c - 52-pin connector

W1 - Front interior lamp

Y7 - Automatic dimming interior rearview mirror

(13) - Ground connection in engine compartment, right Overview Of Ground Connections in Engine Compartment

(367) - Ground connection 2 (in main wiring harness)

(373) - Ground connection 8 (in main wiring harness)

(378) - Ground connection 13 (in main wiring harness)

(684) - Ground connection on left front side member Overview Of Ground Connections in Rear Seats

(A87) - Back-up lamp connection (in instrument panel wiring harness)

(A217) - Positive connection 8 (15a) (in instrument panel wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Depending on equipment

*2 - Through November 2010

*3 - From November 2010

Previous Diagram 38/16 (Tracks 197-210)

Next Diagram 38/18 (Tracks 225-238)