Release, Disconnecting

Release, Disconnecting






- Open the hood.

The release - 2 - is located on the lock carrier - 6 - above the headlamp on the driver side.

- Remove the cable coupling - 2 - from the lock carrier - 6 - in the - direction of arrow b -.

- Remove the cables - 1 and 5 - from the cable coupling.

- Rotate the cable - 1 - in the - direction of arrow a -.

- Remove the cable ball - 3 -- 1 - from the cable mount- 4 -- 5 -.

• When installing, make sure that cable sleeves are inserted correctly and coupling is locked correctly on the lock carrier.

• Make sure the grommets - 6 and 7 - are properly seated.

• Before closing the hood, test the release lever and the release.