Rear Lid Hinge

Rear Lid Hinge

Removing






- Removing rear lid - 5 -, refer to => [ Rear Lid ] Rear Lid

- Remove the roof end strip,

- Screw the hex nuts - 4 - in vehicle interior downward from hinge threaded screws - 1 - and remove the hinge - 1 - from outside.

Installation






- Install the hinge - 1 - together with the washer - 3 - in the vehicle and install the hexagon nut - 4 - on the threaded pin - 1 - on the hinge.

- Align the hinge on the rear lid - 5 -.

- Tightening specification for nuts - 4 -: 24 Nm.

- Screw tightening specification - 2 -: 10 Nm.